國際知名大廠高薪(最高80萬人民幣年薪)急徵各方高手(工作地點：上海、北京、廈門)

chip123 · 發表於 2008-4-17 12:37:44

器件特性资深工程师（年薪15-20万）

任职资格：
1、微电子类相关专业，本科及以上；
2、具有两年及以上同领域相关工作经验，有器件或工艺背景相关者佳；
3、熟悉Agilent HP4156/HP4070等系列测试仪器，能独立完成对器件特性的测试与分析。
4、具有良好的英语应用能力，读写流利；
5、具有主动积极和认真细致的工作态度，注重团队合作。
6、有VB、C语言编程能力的优先

职位描述：
1. 建立与维护各个工艺平台EDR、WAT Spec设计规则
2. 支持与对应解决公司内部部门、外部客户的各方面器件特性的问题；
3. 特殊器件的开发，包括结构设计、测试芯片图形设计、器件评价与设计规则发行；
4. 建立与维护各个工艺平台WAT测试程序，对应TD PI的测试需求。

chip123 · 發表於 2008-4-17 12:38:11

ESD开发工程师/资深工程师（年薪13-20万）

任职资格：
1、微电子类相关专业，本科及以上；
2、具有两年及以上同领域相关工作经验，有器件或工艺背景相关者佳；
3、熟悉ESD基本原理、防护电路设计概念、特性测试；熟悉各类ESD测试芯片设计；熟悉ESD相关设计规则和设计验证。
4、具有良好的英语应用能力，读写流利；
5、具有主动积极和认真细致的工作态度，注重团队合作。
6、有VB、C语言编程能力的优先

职位描述：
1. 按时按项目要求完成ESD相关的测试芯片设计和评价等工作。
2. 确定ESD相关设计规则并保证其正确性与科学性。
3. 给予客户在ESD设计和解决问题方面的技术支持。

chip123 · 發表於 2008-4-17 12:40:39

SEA Resident Quality Engineer
Location: Shanghai
某顶级半导体公司（前15位）NO.16-某全球前十五大半导体公司，美资，全球最著名的高精度模拟电路制造商之一。模拟IC产品的最强者之一。运用模拟IC做开发的电子工程师的圣殿之一。
Job Duties:
Provide strong and effective quality systems support to manufacturing activities at SEA subcontractors, focusing on China. Prevent problems through assuring robust systems, consistent compliance, and proactive problem solving. Overall objective is to enhance and protect xx's image with customers.

1. Ensure compliance to xx policies, procedures and specifications including xx Supplier Management Policy (ADI0007), procedures (SOP's), General Procurement Specification (GPS) and other related xx specifications.
2. Ensure compliance to subcontractor internal controls are adequate to produce product that meets or exceeds ADI requirements.
3. Manage Quality Issues: Lead / participate in CAR/SO activities and MRB's. Ensure all aspects of the 8D report are addressed including containment/root cause/corrective action/preventive action. Verify corrective action effectiveness over time.
4. Perform audits and monitor subcontractor facilities and processes to verify compliance to agreed quality systems, specifications, control procedures, and previously implemented corrective actions.
5. Participate in xx and subcontractor TQM teams.
6. Support qualifications, including new packages, assembly/test processes.
7. Liaison for xx external customer visits and audits to subcontractors.
8. Interface with multiple xx organizations located at subcontractors and the U.S. including Assembly and Test Engineering,
Failure Analysis, Planning, Customer Service, and WWMfg.
9. Ability to interface with subcontractor senior management.
10. Perform other functions or special projects that may be assigned.

Requirement:
1. B.S. Degree in Engineering or Sciences related to the semiconductor industry
2. Experience in a semiconductor company with technical competency in Assembly/Test Engineering; knowledge of process control, TQM Tools, ISO9000/TS16949 standards, automotive customer requirements; audit experience
3. Good communication skills with the ability to interface with senior personnel at subcontractors and with xx; able to function
independently at a distance from supervisor

chip123 · 發表於 2008-4-28 17:22:41

Sales and Marketing Director（上海）（30K左右，13月薪，英文好）

要求:男性
10年电子产品相关工作经验
在华东电子产品领域工作至少3-5年
具备公司高层管理经验至少3年
具备DISTY经验
拥有新的产品线和新的客户资源,具备良好的客户关系
在mobile consumer electronics领域具备良好的经验及专业知识
要求香港人,台湾人或者新加坡人,外国人也可.
负责 plexus-n.asia的market director的工作,包括上海,深圳,台湾,北京,厦门…

chip123 · 發表於 2008-12-3 14:32:17

JOB RESPONSIBILITIES

1.    To be responsible of overall module business operation in the business unit.
2.    To establish the complete flow and necessary systems of module product creation including product spec., BOM analysis, product development, contracted manufacturing, quality assurance and logistics management.
3.    To recruit, develop and lead a team with functions of product management, supply-chain management, planning and QA.
4.    To work with design and solution centers for new module product development.
5.    To work with business development team for customer requirement and product rollout.
6.    To work with contracted manufacturers for module product manufacturing and logistics management.
7.    To drive cost improvement roadmap for module products by identifying and engaging with proper suppliers.

REQUIREMENT

1.    12~15 years of working experience.
2.    Direct experience of handling Trackpad Module project in house and with contracted manufacturers.
3.    Capable of coordinating a module product creation including product definition, development, manufacturing, QA and logistics.
4.    Knowledge and direct experience of module supply-chain management.
5.    Good communication skill and command in English.
6.    Mature and can work independently. Capable of driving results proactively.
7.    Experience and good leadership of recruiting and managing a team of work force.
8.    BSEE/MSEE or related decree.

chip123 · 發表於 2009-12-25 11:20:18

Digital design on deep sub-micron technologies for high speed complicated digital and mix signal ASIC products
Develop micro architecture specification based on chip level design specification
RTL and verification methodologies and platform development
DFT, synthesis and timing closure
Chip level bring up, validation and debug

职位要求

MSEE with 5+ years of experience on digital ASIC design in complicated and mix signal deep sub-micron environment
Proficiency in Verilog and its simulation environment
Proficiency in RTL synthesis, DFT and timing verification with deep sub-micron process
Experience with PCIE, USB2.0/USB3.0, SATA, etc. is a big plus
Experience on high speed/low power design is preferred
Experience with chip integration flow for high speed mix signal ASIC is a plus
Good written and spoken English is a must
Self-motivated and a strong team player

地点 Shanghai

chip123 · 發表於 2009-12-25 11:22:14

Job Duties:

1.Develop, simulate, and implement DFT design for the new chips and meet the tapeout sehedule.
2.Develop the high coverage and cost effecive test patterns for the production test.
3.Evaluate and establish the advanced DFT tools and flow.

Qualifications: (Education, Experience, etc)

1.BSEE required and MSEE preferred.
2.Minimum 2-3 years of DFT or related design experience.
3.Profieient in verilog and ATPG tools.
4.capable of independent study, project management and bring in new methodology.
5.Strong commiment to schedule and work quality.
6.Good team work and communication.

地点 Shanghai

chip123 · 發表於 2009-12-25 11:25:16

职位描述
Should have good understanding of the whole ASIC design flow,i.e, logic design, rtl coding, verification, synthesis, timing and backend.
Should have good background in communication theory and embedded systems.
Should have taped out at least 2 commercial chips in the past.
Should be proficient in the lab in terms of FPGA emulation and IC testing.
Should be able to work with marketing team and system team to define the proper product spec.
A self starter, motivated, hardworking and a good leader.

职位要求
BSEE required, MSEE prefered. 3-5 years industrial experience.

地点 shanghai

chip123 · 發表於 2009-12-25 11:25:28

公司简介
XX is a place where people excel at solving real world problems and challenges in unique ways. We are a company where new ideas germinate and take root when passionate, intelligent, and highly inspired people work together.

At XX we provide an environment for experimentation, innovation and collaboration. We foster an entrepreneurial approach that is forward-looking, nimble and unconventional – and we pride ourselves on thinking outside the box. Our team is unflappable in the face of audacious goals and challenges. Founded in Sept. 2003 by 8 veterans of the semiconductor industry, XX was bootstrapped utilizing revenues generated through consulting projects. Subsequently, in Nov. 2004, XX secured Series-A venture financing upon the completion of its first prototype silicon television tuner in CMOS technology.

At the very inception, XX recognized the benefits of CMOS IC technology over exotic SiGe and GaAs technology for broadband RF ICs, in a contradiction of conventional wisdom. XX developed the first digital CMOS television tuner in 2005, and began shipping the first of its CMOS tuners in October, 2006. In early 2007, XX marked another major milestone when started shipping the world’s smallest silicon TV tuner. By continuously improving and excelling in our CMOS-based RF and mixed signal IC processing techniques, XX endeavors to stay at the forefront of communications IC technology. As a result, we deliver IC products that consume the lowest power, have the smallest size and superior performance that results in highly differentiated customer platform solutions.

XX is the first company to deliver the triumvirate of best performance, lowest power and smallest size, in its TV tuner solutions enabling television on devices ranging from mobile phones and computers to set-top boxes and automobiles. . XX - We envision, empower and excel in all that we do!

chip123 · 發表於 2010-2-1 15:10:50

A famous company 地点 wuxi
职位描述岗位职责：

1. 调研相关产品、技术，协助相关技术的引进。
2. 负责现场组织管理，代表单位与业主、分包方沟通、协调管理；
3. 组织项目系统集成方案的实施工作，竣工文件编写等工作。
4. 硬件集成方案设计与安装、系统设备调测
5. 完成上级主管交办的其它任务

职位要求任职资格：

1. 本科以上学历，通信工程、电子信息与电气工程、自动化控制等专业毕业
2. 具备2年或以上系统集成领域项目经验，有独立组织实施项目管理的经历。
3. 有安防监控系统设计及施工经验，掌握建筑综合布线系统知识。
4. 熟悉IT领域、自动控制专业知识，了解视频、电源、综合布线等相关专业知识。了解不同行业的应用需求，掌握代表性产品的使用案例、性能，并能无缝集成到特定的应用环境中。
5. 有系统集成项目管理工程师资格证、信息系统项目管理师资格证、计算机信息系统集成项目经理资质优先。
6. 熟练使用CAD， Microsoft office Project。熟悉项目管理全过程。
7. 性格开朗，工作积极主动、认真负责，有较强的沟通能力。有良好的团队意识及服务意识，优秀的口头、书面表达能力。

		自動登錄	找回密碼
密碼			申請會員

[企業求才] 國際知名大廠高薪(最高80萬人民幣年薪)急徵各方高手(工作地點：上海、北京、廈門)

美資公司爭聘CPU Module Project Manager年薪至少30萬人民幣以上

one famous IC company looking for Sr. ASIC Digital Design Engineer

A famous IC company looking for DFT engineer

A famous IC company looking for ASIC Design Engineer

System integration engineer - product r&d system integration

瀏覽過的版塊