Chip123 科技應用創新平台

 找回密碼
 申請會員

QQ登錄

只需一步,快速開始

Login

用FB帳號登入

搜索
1 2 3 4
123
返回列表 發新帖
樓主: swliu
打印 上一主題 下一主題

破解AC-LED的迷思

  [複製鏈接]
41#
發表於 2009-12-21 23:31:50 | 只看該作者
Thank you for sharing. Good material
42#
發表於 2010-3-25 18:47:53 | 只看該作者
我也來跟各位學習LED這個新領域!
43#
發表於 2010-4-8 11:35:39 | 只看該作者
AC-LED技術還需要提高,可能有其發揮空間
44#
發表於 2010-4-12 13:37:30 | 只看該作者
AC LED 需要克服的部份
1.電流隨著電壓變化
2.LED的使用效率變差(AC LED發光的時機不是轉換效率最高)
3.LED成本增加(LED晶片上需要更多區域做LED間的接線)
目前我覺得這三個部份是無解。
作法上就是對LED做加工去省AC-DC轉換電路
AC LED可能有市場的情況是在LED的價格~AC-DC電路的價格
以目前的成本結構來說LED價格>>AC-DC
現在看起來是花大錢省小錢。
電光所做AC LED不知道有沒有找能資所的人問問......
45#
發表於 2010-5-28 18:26:25 | 只看該作者
Thanks for your information.
I like this one
46#
發表於 2010-7-7 09:07:51 | 只看該作者
AC LED might be good in low wattage application but not as good as high wattage application. The unit price for AC LED is about USD 6.0/ 5W which is able to generate the Lumen at 50X5 = 250lm, but this figure is just for the pure LED only not take the diffuser, Lens and the reflector optical loss into account. Not to metion the thermal may drive down its lumen output. One more concern is the IP. I'm sure Epistar's AC LED is not allowed for the Japan market maybe other countries as well.

Take the DC LED as reference, the price is about USD 1.2/ W but the lumen efficiency is 100 lm/w which is about twice than AC LED. The DC LED application just has the problem in low wattage application. Like the night light, however take the safety into concern to buy the lighting fixture made by DC LED is safer. There are a lot of the pros and cons between the AC/DC LED, technically DC LED has better chance.
47#
發表於 2010-8-2 13:55:21 | 只看該作者
回復 25# jiming


    謝謝大大
48#
發表於 2010-9-9 05:08:15 | 只看該作者
感謝分享,
AC-LED的市場的確直得多關注
49#
發表於 2010-9-12 06:49:14 | 只看該作者
原PO是高手,相當認同,LED BACKLIGHT須調光、定功率等技術,並非簡簡單單加個限流電阻就好
50#
發表於 2011-4-11 10:00:54 | 只看該作者
工研院的AC LED應是將LED排成橋是整流器的架構,中間一串always發光, 但其餘則僅在一半時間導通發光,不是嗎??
51#
發表於 2011-4-14 09:42:21 | 只看該作者
我認為發展HV LED 才是正道
配上其他元件 亦可達到高PF 的效果
且成本低
52#
發表於 2011-5-12 11:27:44 | 只看該作者
AC-LED大約超過4W就會發現有熱所造成的閃爍的問題!!
除非找出非linear的控制方式~
不然熱消耗所造成LED的熱累積~
長期下來不是LED燒毀就是Driver電路毀損~
AC-LED驅動方式目前聽到不外乎就

1.串聯電阻驅動
2.CRD驅動
3.Linear分段驅動電路 (EX. AIC6600)
不過以上的方法好像都無法避免效率差~熱累積的問題!!
如果各位大大有其他的驅動方式~看有無機會討論看看~
若能解決熱的問題~AC-LED才有希望大功率方向前進...........
您需要登錄後才可以回帖 登錄 | 申請會員

本版積分規則

首頁|手機版|Chip123 科技應用創新平台 |新契機國際商機整合股份有限公司

GMT+8, 2024-4-29 10:31 PM , Processed in 0.118007 second(s), 17 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表